All persons affected by the provisions of Subchapter F, Division 1 of this chapter (relating to Adipic Acid Manufacturing) or the provisions of Subchapter F, Division 2 of this chapter (relating to Nitric Acid Manufacturing-Ozone Nonattainment Areas) shall be in compliance as soon as practicable, but no later than November 15, 1999 (final compliance date). All affected persons shall meet the following compliance schedules and submit written notification to the executive director: (1) no later than April 1, 1994, submit a control plan for compliance as specified in §117.4050 of this title and §117.4150 of this title (relating to Control Plan Procedures); (2) conduct applicable continuous emissions monitoring system (CEMS) or predictive emissions monitoring system (PEMS) performance evaluation and quality assurance procedures as specified in §117.4040 and §117.4140 of this title (relating to Continuous Demonstration of Compliance); provide previous testing documentation for any claimed test waiver as allowed by §117.4035(d) or §117.4135(d) of this title (relating to Initial Demonstration of Compliance); and conduct applicable initial demonstration of compliance testing as specified in §117.4035 and §117.4135 of this title, by: (A) no later than January 1, 1994, for affected facilities not performing process modification or installation of a CEMS or PEMS device as part of the control plan specified in §117.4050 and §117.4150 of this title; and (B) no later than November 15, 1999, for affected facilities performing process modification or installation of a CEMS or PEMS device as part of the control plan specified in §117.4050 and §117.4150 of this title; (3) within 60 days after the applicable date specified in paragraph (2)(A) or (B) of this section, submit the results of CEMS or PEMS performance evaluation and quality assurance procedures and the results of initial demonstration of compliance testing specified in paragraph (2) of this section. |
