| (A) Requirements to provide for and assure compliance with standards set by the rules of the commission and the laws of Texas shall be determined and included in permits on a case-by-case basis to reflect the best method for attaining such compliance. Each permit shall contain terms and conditions as the commission determines necessary to protect human health and safety, and the environment. Reference is made to Chapter 330 of this title (relating to Municipal Solid Waste) for municipal solid waste facility standards, to Chapter 331 of this title (relating to Underground Injection Control) for injection well standards, to Chapter 335 of this title (relating to Industrial Solid Waste and Municipal Hazardous Waste) for solid waste facility standards, to Chapter 336 of this title (relating to Radioactive Substance Rules) for radioactive material disposal standards, to Chapter 309 of this title (relating to Domestic Wastewater Effluent Limitation and Plant Siting) for waste discharge standards, to Chapter 329 of this title (relating to Drilled or Mined Shafts) for drilled or mined shaft standards, and to Chapter 222 of this title (relating to Subsurface Area Drip Dispersal Systems) for subsurface area drip dispersal systems standards. (B) Any applicable statutory or regulatory requirements which take effect prior to final administrative disposition of an application for a permit or prior to the amendment, modification, or suspension and reissuance of a permit shall be included in the permit. (C) New, amended, modified, or renewed permits shall incorporate any applicable requirements contained in Chapter 331 of this title for injection well standards, Chapter 335 of this title for solid waste facility standards, Chapter 336 of this title, Chapter 309 of this title for waste discharge standards, Chapter 329 of this title for drilled or mined shaft standards, and Chapter 222 of this title for subsurface area drip dispersal systems standards. (5) Wastes authorized. (A) Injection well permits. Each category of waste to be disposed of by injection well shall be authorized in the permit. (B) Drilled or mined shaft permits. Each category of waste to be handled, stored, processed, or disposed of in a drilled or mined shaft, or in associated surface facilities shall be authorized in the permit. (C) Unauthorized wastes. Wastes not authorized by permit are prohibited from being transported to, stored, and processed or disposed of in a permitted facility. (6) Permit conditions. All permit conditions shall be incorporated either expressly or by reference. If incorporated by reference, a specific citation to the applicable rules or requirements must be given in the permit. |
| Source Note: The provisions of this §305.127 adopted to be effective June 19, 1986, 11 TexReg 2597; amended to be effective October 8, 1990, 15 TexReg 5492; amended to be effective October 29, 1990, 15 TexReg 6015; amended to be effective June 13, 1996, 21 TexReg 4999; amended to be effective February 11, 1997, 22 TexReg 1169; amended to be effective September 14, 2000, 25 TexReg 8974; amended to be effective January 8, 2004, 29 TexReg 136; amended to be effective July 5, 2006, 31 TexReg 5333; amended to be effective March 12, 2009, 34 TexReg 1629 |
