<<Prev Rule

Texas Administrative Code

Next Rule>>
TITLE 37PUBLIC SAFETY AND CORRECTIONS
PART 13TEXAS COMMISSION ON FIRE PROTECTION
CHAPTER 457MINIMUM STANDARDS FOR INCIDENT SAFETY OFFICER CERTIFICATION
RULE §457.3Minimum Standards for Incident Safety Officer Certification

In order to be certified as an Incident Safety Officer an individual must:

  (1) hold commission certification as Fire Officer I and;

  (2) possess valid documentation of accreditation from the International Fire Service Accreditation Congress as an Incident Safety Officer; or

  (3) complete a commission approved Incident Safety Officer program and successfully pass the commission examination as specified in Chapter 439 of this title (relating to Examinations for Certification). An approved Incident Safety Officer program must consist of one of the following:

    (A) completion of an in-state Incident Safety Officer program meeting the requirements of the applicable NFPA standard and conducted by a commission certified training provider, that was submitted and approved through the commission’s training prior approval system; or

    (B) completion of an out-of-state, educational institution of higher education, and/or military training program that has been submitted to the commission for evaluation and found to meet the requirements of the applicable NFPA standard.


Source Note: The provisions of this §457.3 adopted to be effective August 20, 2012, 37 TexReg 6316; amended to be effective March 2, 2014, 39 TexReg 1173; amended to be effective November 10, 2014, 39 TexReg 8743; amended to be effective January 26, 2017, 41 TexReg 244

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page