Figure: 30 TAC §113.2261(b)
| Pollutant | Emission Limitationa | Averaging Time | Method to Determine Compliance |
|---|---|---|---|
| Cadmium | 0.004 milligrams per dry standard cubic meter |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 29 of 40 CFR Part 60, Appendix A) |
| Carbon monoxide |
157 parts per million by dry volume |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 10, 10A, or 10B, of 40 CFR Part 60, Appendix A) |
| Dioxins/furans (toxic equivalency basis) |
0.41 nanograms per dry standard cubic meter |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 23 of 40 CFR Part 60, Appendix A) |
| Hydrogen chloride |
62 parts per million by dry volume |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 26A of 40 CFR Part 60, Appendix A) |
| Lead | 0.04 milligrams per dry standard cubic meter |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 29 of 40 CFR Part 60, Appendix A) |
| Mercury | 0.47 milligrams per dry standard cubic meter |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 29 of 40 CFR Part 60, Appendix A) |
| Opacity | 10 percent | 6-minute averages | Performance test (Method 9 of 40 CFR Part 60, Appendix A) |
| Oxides of nitrogen |
388 parts per million by dry volume |
3-run average (1 hour minimum sample time per run) |
Performance test (Methods 7, 7A, 7C, 7D, or 7E of 40 CFR Part 60, Appendix A) |
| Particulate matter |
70 milligrams per dry standard cubic meter |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 5 or 29 of 40 CFR Part 60, Appendix A) |
| Sulfur dioxide | 20 parts per million by dry volume |
3-run average (1 hour minimum sample time per run) |
Performance test (Method 6 or 6C of 40 CFR Part 60, Appendix A) |
aAll emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard
conditions.