(a) In the Dallas-Fort Worth and Houston-Galveston-Brazoria
areas, the owner or operator of a piece of equipment that meets the
applicability in §115.170 of this title (relating to Applicability)
and is subject to a requirement of this division shall be in compliance
as soon as practicable, but no later than January 1, 2023.
(b) For an owner or operator in the Dallas-Fort Worth
and Houston-Galveston-Brazoria areas subject to this division as of
January 1, 2023, the recordkeeping required by §115.180(8) of
this title (relating to Recordkeeping Requirements) must be completed
no later than March 31, 2023.
(c) An owner or operator who becomes subject to the
requirements of this division on or after the date specified in the
applicable subsection of this section shall comply with the requirements
in this division no later than 60 days after becoming subject. Recordkeeping
required under §115.180(8) of this title must be complied with
no later than 30 days after compliance with the division is achieved.
(d) The owner or operator of a storage tank in the
Dallas-Fort Worth and Houston-Galveston-Brazoria areas subject to
the requirements in Division 1 of this subchapter (relating to the
Storage of Volatile Organic Compounds) shall remain subject to that
division until compliance with the requirements in this division are
achieved, but not later than January 1, 2023.
(e) The owner or operator of a fugitive emission component
at a natural gas processing plant in the Dallas-Fort Worth and Houston-Galveston-Brazoria
areas as defined in §115.10 of this title (relating to Definitions),
subject to the requirements of Subchapter D, Division 3 of this chapter
(relating to Fugitive Emission Control in Petroleum Refining, Natural
Gas/Gasoline Processing, and Petrochemical Processes in Ozone Nonattainment
Areas) shall remain subject to that division until compliance with
the requirements in this division are achieved, but not later than
January 1, 2023.
(f) Upon the date the owner or operator can no longer
claim the exceptions in §115.174(e) of this title (relating to
Pneumatic Controller and Pump Control Requirements), the owner or
operator shall comply with the appropriate control requirement within
60 days.
(g) The owner or operator of a piece of equipment in
the Bexar County area subject to the requirements of this division
shall comply with the requirements of this division no later than
January 1, 2025.
|