<<Prev Rule | Texas Administrative Code |
Next Rule>> |
TITLE 30 | ENVIRONMENTAL QUALITY |
PART 1 | TEXAS COMMISSION ON ENVIRONMENTAL QUALITY |
CHAPTER 116 | CONTROL OF AIR POLLUTION BY PERMITS FOR NEW CONSTRUCTION OR MODIFICATION |
SUBCHAPTER C | PLANT-WIDE APPLICABILITY LIMITS |
DIVISION 1 | PLANT-WIDE APPLICABILITY LIMITS |
RULE §116.188 | Plant-wide Applicability Limit |
The plant-wide applicability limit (PAL) is the sum of the baseline actual emissions of the PAL pollutant for each existing facility at the source to be covered. The allowable emission rate may be used for facilities that did not exist in the baseline period. Baseline actual emissions from facilities that were permanently shut down after the baseline period must be subtracted from the baseline emissions rate. |
Source Note: The provisions of this §116.188 adopted to be effective February 1, 2006, 31 TexReg 515; amended to be effective March 3, 2011, 36 TexReg 1305 |