(a) Application. An electric utility or power generation company
that the commission determines owns and controls more than 20% of the installed
generation capacity located in, or capable of delivering electricity to, a
power region shall file a market power mitigation plan with the commission
not later than December 1, 2000. An electric utility or power generation company
that the commission determines owns and controls more than 20% of the installed
generation capacity located in, or capable of delivering electricity to, a
power region after January 1, 2002, shall file a market power mitigation plan
as directed by the commission. The commission may, for good cause, waive or
modify the requirement to file a market power mitigation plan, in accordance
with Public Utility Regulatory Act (PURA) §39.154(b). This section does
not apply to an electric utility subject to PURA §39.102(c) until the
end of the utility's rate freeze.
(b) Initial information filing. Each utility or power generation
company that owns and controls, either separately or in combination with its
affiliates, more than 10,000 megawatts (MW) of electric generation capacity
located in a power region that is partly or entirely within the state shall
file a calculation by September 5, 2000, detailing the installed generation
for its power region expected as of January 1, 2002, and showing its percentage
share of the installed generation capacity located in, or capable of delivering
electricity to, the power region, plus the capacity expected to be interconnected
to the transmission system by January 1, 2002, less the capacity to be auctioned
off pursuant to PURA §39.153, and any grandfathered facilities capacity
pursuant to PURA §39.154(e). The calculation shall be made pursuant to
the requirements of §25.401 of this title (relating to Share of Installed
Generation Capacity). The filing shall include detailed information that will
allow the commission to replicate the calculation. At a minimum, the filing
must include an itemized list of all generating units that are located in,
or capable of delivering electricity to, the power region and are owned and
controlled by the utility or power generation company and its affiliates in
the power region or capable of delivering electricity to the power region.
Generating units should be identified by name, capacity rating, ownership,
location, and reliability council. Capacity shall be rated according to the
method established in §25.91(f) of this title (relating to Generating
Capacity Reports). The filing shall also include the transmission import capacity
amounts that are to be included in the numerator and the denominator of the
calculation prescribed by §25.401 of this title and an explanation of
how the transmission capacity amounts were determined. Any interested parties
may respond to the utility filings by filing comments with the commission
by September 29, 2000. By October 20, 2000, the commission will indicate which
utilities, if any, exceed the 20% threshold and are required to file a market
power mitigation plan on or before December 1, 2000.
(c) Market power mitigation plan. A market power mitigation
plan is a written proposal by an electric utility or a power generation company
for reducing its ownership and control of installed generation capacity as
required by PURA §39.154. A market power mitigation plan may provide
for:
(1) the sale of generation assets to a nonaffiliated person;
(2) the exchange of generation assets with a nonaffiliated
person located in a different power region;
(3) the auctioning of generation capacity entitlements
as part of a capacity auction required by PURA §39.153;
(4) the sale of the right to capacity to a nonaffiliated
person for at least four years; or
(5) any reasonable method of mitigation.
(d) Filing requirements. The plan shall include all supporting
information necessary for the commission to fully understand and evaluate
the plan. On a case-by-case basis, the commission may require the electric
utility or power generation company to provide any additional information
the commission finds necessary to evaluate the plan. The plan submitted should
incorporate information addressing the determinations listed in subsection
(f) of this section.
(e) Procedure. The commission shall approve, modify, or reject
a plan within 180 days after the date of filing. The commission may not modify
the plan to require divestiture by the electric utility or power generation
company.
(f) Commission determinations. In reaching its determination
under subsection (e) of this section, the commission shall consider:
(1) the degree to which the electric utility's or power generation
company's stranded costs, if any, are minimized;
(2) whether on disposition of the generation assets the
reasonable value is likely to be received;
(3) the effect of the plan on the electric utility's or
power generation company's federal income taxes;
(4) the effect of the plan on current and potential competitors
in the generation market;
(5) whether the plan provides adequate mitigation of market
power; and
(6) whether the plan is consistent with the public interest.
(g) Request to amend or repeal mitigation plan. An electric
utility or power generation company with an approved mitigation plan may request
to amend or repeal its plan. On a showing of good cause, the commission may
modify or repeal the mitigation plan.
(h) Approval date. If an electric utility's or power generation
company's market power mitigation plan is not approved before January 1 of
the year it is to take effect, the commission may order the electric utility
or power generation company to auction generation capacity entitlements according
to PURA §39.153, subject to commission approval, of any capacity exceeding
the maximum allowable capacity prescribed by PURA §39.154 until the mitigation
plan is approved. An auction held under this subsection shall be held not
later than 60 days after the date the order is entered.
|