(a) Definition of terms. The following words have the following
meanings, unless the context clearly indicates otherwise.
(1) Act--The Real Estate License Act, Article 6573a, Texas
Civil Statutes.
(2) Functioning--Performing in an expected or required
manner; carrying out the design purpose or intended operation of a part, system,
component, member.
(3) Inaccessible--Not having access without the use of
special tools, equipment, or instruments, or removing doors, walls, stored
items or similar obstructions, or by causing damage to a structure, finish
or component, equipment or system, or by virtue of inadequate clearance, walkways,
passageways, or hazardous condition.
(4) In Need of Repair--Does not adequately function or
perform.
(5) Inspect--To look at and examine accessible items,
parts, systems or components without, except as required by the rules of the
Texas Real Estate Commission, laboratory, scientific or engineering evaluation
or testing, destructive tests or the dismantling or removal of parts, members
or components.
(6) Inspector--A person licensed as a professional inspector,
a person licensed as an apprentice inspector or a person licensed as a real
estate inspector.
(7) Performance--The act of carrying out, completing,
executing or achievement of an operation, design or function in a manner consistent
with the intent of the manufacturer, designer or accepted industry practice.
(8) Report--A written or oral communication of the inspector's
opinions, observations, determinations, and findings in an inspection.
(9) Standards of Practice--§535.227 of this title
(relating to Standards of Practice: General Provisions), §535.228 of
this title (relating to Standards of Practice: Inspection Guidelines for Structural
Systems, §535.229 of this title (relating to Standards of Practice: Inspection
Guidelines for Mechanical Systems: Appliances, Cooling Systems, Heating Systems,
Ducts, Vents and Flues, and Plumbing Systems), §535.230 of this title
(relating to Standards of Practice: Inspection Guidelines for Electrical Systems)
and §535.231 of this title (relating to Standards of Practice: Optional
Systems).
(b) Scope.
(1) The standards of practice are the minimum levels of inspection
practice required of inspectors for the accessible parts, components, and
systems typically found in improvements to real property, excluding detached
structures, decks, docks and fences. The inspector may provide a higher level
of inspection performance than required by the standards of practice and may
inspect parts, components, and systems in addition to those described by the
standards of practice.
(2) The inspector shall:
(A) inspect items, parts, systems, components and conditions
which are present and visible at the time of the inspection, but the inspector
is not required to determine or estimate the remaining life expectancy or
future performance of any inspected item, part, system or component;
(B) operate mechanical and electrical equipment, systems, and
appliances during an inspection in normal modes and operating range at the
time of the inspection;
(C) report which of the parts, components, and systems present
in the property have or have not been inspected;
(D) report as in need of repair inspected parts, components
or systems that are not functioning or that the standards of practice require
the inspector to report as in need of repair;
(E) address all of the parts, components, and systems contained
in the standards of practice in the property being inspected.
(F) complete the standard inspection report form under §535.223
of this title (relating to Standard Inspection Reports) if that section applies;
(G) identify in any written report the inspector who performed
the inspection by name and license number;
(H) comply with any other law or license requirement necessary
to perform inspections or services other than what is required by the standards
of practice, such as an air-conditioning and refrigeration contractor license
which may be required for the inspector to make a direct in-line connection
to a refrigerant system, or a structural pest control license which may be
required to perform a wood-destroying-insect inspection;
(3) In the event of a conflict between a specific
provision and a general provision in the standards of practice, the specific
provision controls. The standards of practice do not apply to the following:
(A) parts, components or systems other than those specifically
described;
(B) conditions other than those specifically described, such
as environmental conditions, presence of toxic or hazardous wastes or substances,
presence of termites or other wood-destroying insects or organisms, compliance
with codes, ordinances, statutes or restrictions or the efficiency, quality,
durability of any item inspected;
(C) any part, component or system the inspector excludes under
the departure provision in this section; and
(D) any determination of insurability or warrantability of
any part, component or system.
(c) Departure Provision.
(1) An inspector shall exclude from the inspection any part,
component or system which the inspector is not competent or qualified to inspect.
(2) An inspector may exclude any part, component or system
required for inspection by the standards of practice which is inaccessible,
cannot be inspected due to circumstances beyond the control of the inspector,
or the inspector's client has agreed is not to be inspected.
(3) This departure provision does not prohibit an inspector
from specializing nor require the inspector to specifically exclude other
parts, components or systems not ordinarily considered a part of the inspector's
specialty. However, the inspector shall comply with the standards of practice
for the items being inspected.
(4) If an inspector excludes any part, component or system
listed in the standards of practice, other than one which the client has agreed
is not to be inspected, the inspector shall:
(A) advise the client at the earliest practicable time that
the specific part, component or system will not be included in the inspection;
and
(B) state in any written inspection report that the excluded
part, component or system was not inspected.
(d) Enforcement. Failure to comply with §535.227 of this
title (relating to Standards of Practice: General Provisions), §535.228
of this title (relating to Standards of Practice: Inspection Guidelines for
Structural Systems, §535.229 of this title (relating to Standards of
Practice: Inspection Guidelines for Mechanical Systems: Appliances, Cooling
Systems, Heating Systems, Ducts, Vents and Flues, and Plumbing Systems), §535.230
of this title (relating to Standards of Practice: Inspection Guidelines for
Electrical Systems) and §535.231 of this title (relating to Standards
of Practice: Optional Systems) is a ground for disciplinary action as prescribed
by the Act, §23(1)(7) and §535.224 of this title (relating to Proceedings
before the Committee).
|