(a) The commission adopts the standards for the installation,
maintenance, repair, replacement, alteration, testing, operation,
and inspection of equipment that are contained in the following codes:
(1) ASME Code A17.1-2016/CSA B44-16 as amended in subsection
(b);
(2) ASME Code A17.3-2002;
(3) ASME Code A18.1-2005; and
(4) ASCE Code 21.
(b) The following amendments shall be made to ASME
Code A17.1-2016/CSA B44-16:
(1) Delete requirement 1.2.1(c) and all references
to ASME Code A17.7 within the adopted standard, preface and appendices.
(2) Delete 2.12.7.2.1(c) hoistway access switch on
sight guard.
(3) Delete 7.4.2.2 and all references to type B material
lifts within the adopted standard, preface, and appendices.
(4) Delete requirement 8.6.4.19.7 standby or emergency
power operation.
(5) Delete requirement 8.6.5.14.3(f) standby or emergency
power operation.
(6) Delete requirement 8.10.2.2.1(q) emergency or standby
power operation.
(7) Delete requirement 8.10.2.3.2(l) emergency or standby
power alterations.
(8) Delete requirement 8.10.3.3.2(l) emergency or standby
power alterations.
(9) Delete the reference to ASME Code A17.3 contained
within 9.1.
(10) Delete Appendix E in its entirety.
(c) The effective dates of:
(1) ASME Code A17.1-2016/CSA B44-16 and the amendments
in subsection (b) shall be effective on November 1, 2018.
(2) ASME Code A18.1-2005 shall be effective September
1, 2008.
(3) ASME Code A17.3-2002 continues to be in effect.
|
Source Note: The provisions of this §74.100 adopted to be effective July 1, 2012, 37 TexReg 4590; amended to be effective November 15, 2013, 38 TexReg 7949; amended to be effective November 1, 2018, 43 TexReg 6947 |