<<Prev Rule

Texas Administrative Code

 Next Rule>>
TITLE 16ECONOMIC REGULATION
PART 4TEXAS DEPARTMENT OF LICENSING AND REGULATION
CHAPTER 97MOTOR FUEL METERING AND QUALITY
SUBCHAPTER DSERVICE COMPANIES AND SERVICE TECHNICIANS
RULE §97.58Test Standards
(a) Test standards must be certified annually by a recognized or accredited laboratory that adheres to ISO 17025 standards. A service company must maintain at least one test standard per licensed device category as follows:

  (1) Low flow: five-gallon or greater test measure or prover;

   (2) High flow: prover with a capacity that exceeds the amount of liquid delivered by the device in one minute at the maximum flow rate.

 (b) A test standard that becomes damaged must be taken out of operation immediately and recalibrated prior to use. A test standard that is beyond repair must be taken out of service permanently.

 (c) A service company must maintain the minimum test standards per licensed device category at all times.
Source Note: The provisions of this §97.58 adopted to be effective September 1, 2020, 45 TexReg 6082; amended to be effective March 1, 2022, 47 TexReg 911

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page