| (a) Where continuous emission monitoring systems are required, obtain 1-hour arithmetic averages. Make sure the averages for sulfur dioxide, nitrogen oxides (Class I municipal waste combustion units only), and carbon monoxide are in parts per million by dry volume at 7 percent oxygen (or the equivalent carbon dioxide level). Use the 1-hour averages of oxygen (or carbon dioxide) data from your continuous emission monitoring system to determine the actual oxygen (or carbon dioxide) level and to calculate emissions at 7 percent oxygen (or the equivalent carbon dioxide level). (b) Obtain at least two data points per hour in order to calculate a valid 1-hour arithmetic average. 40 Code of Federal Regulations §60.13(e)(2) requires your continuous emission monitoring systems to complete at least one cycle of operation (sampling, analyzing, and data recording) for each 15-minute period. (c) Obtain valid 1-hour averages for 75 percent of the operating hours per day for 90 percent of the operating days per calendar quarter. An operating day is any day the unit combusts any municipal solid waste or refuse-derived fuel. (d) If you do not obtain the minimum data required in subsections (a) through (c) of this section, you are in violation of the data collection requirement regardless of the emission level monitored, and you must notify the executive director according to §113.2161(5) of this title (relating to What must I include in my annual report?). (e) If you do not obtain the minimum data required in subsections (a) through (c) of this section, you must still use all valid data from the continuous emission monitoring systems in calculating emission concentrations and percent reductions in accordance with §113.2135 of this title (relating to How do I convert my 1-hour arithmetic averages into appropriate averaging times and units?). |
