| (a) Where continuous emission monitoring systems are required, obtain 1-hour arithmetic averages. Make sure the averages for carbon monoxide are in parts per million by dry volume at 7 percent oxygen. Use the 1-hour averages of oxygen data from your continuous emission monitoring system to determine the actual oxygen level and to calculate emissions at 7 percent oxygen. (b) Obtain at least two data points per hour in order to calculate a valid 1-hour arithmetic average. Title 40 Code of Federal Regulations §60.13(e)(2) requires your continuous emission monitoring systems to complete at least one cycle of operation (sampling, analyzing, and data recording) for each 15-minute period. (c) Obtain valid 1-hour averages for at least 75 percent of the operating hours per day for at least 90 percent of the operating days per calendar quarter. An operating day is any day the unit combusts any municipal or institutional solid waste. (d) If you do not obtain the minimum data required in subsections (a) through (c) of this section, you have deviated from the data collection requirement regardless of the emission level monitored. (e) If you do not obtain the minimum data required in subsections (a) through (c) of this section, you must still use all valid data from the continuous emission monitoring systems in calculating emission concentrations. (f) If continuous emission monitoring systems are temporarily unavailable to meet the data collection requirements, refer to Table 4 in §113.2357 of this title (relating to Tables Relating to Division 5). It shows alternate methods for collecting data when systems malfunction or when repairs, calibration checks, or zero and span checks keep you from collecting the minimum amount of data. |
