| (a) The owner or operator of each volatile organic
compound (VOC) transfer operation in the Beaumont-Port Arthur, Bexar
County, Dallas-Fort Worth, El Paso, Houston-Galveston-Brazoria areas,
shall comply with the following inspection requirements.
(1) Land-based VOC transfer to or from transport vessels.
(A) During each VOC transfer, the owner or operator
of the transfer operation or of the transport vessel shall inspect
for:
(i) visible liquid leaks;
(ii) visible fumes; and
(iii) significant odors.
(B) VOC loading or unloading through the affected transfer
lines shall be discontinued immediately when a leak is observed and
shall not be resumed until the observed leak is repaired.
(C) All tank-truck tanks being filled with or emptied
of gasoline, or being filled with non-gasoline VOC having a true vapor
pressure greater than or equal to 0.5 pounds per square inch absolute
under actual storage conditions, shall have been leak tested within
one year in accordance with the requirements of §§115.234
- 115.237 of this title (relating to Control of Volatile Organic Compound
Leaks From Transport Vessels) as evidenced by prominently displayed
certification affixed near the United States Department of Transportation
certification plate.
(D) Subparagraphs (A) and (B) of this paragraph do
not apply to fumes from hatches or vents if the fumes result from:
(i) a VOC transfer which is exempt from §115.211
or §115.212(a)(1) of this title (relating to Emission Specifications;
and Control Requirements) under §115.217(a) of this title (relating
to Exemptions); or
(ii) a VOC loading operation which, under the 90% control
option in §115.213(b) of this title (relating to Alternate Control
Requirements), is not required to control vapors caused by loading
VOC.
(2) Gasoline terminals-additional inspection. The owner
or operator of each gasoline terminal shall perform a monthly leak
inspection of all equipment in gasoline service. Each piece of equipment
shall be inspected during the loading of gasoline tank-trucks. For
this inspection, detection methods incorporating sight, sound, and
smell are acceptable. Alternatively, a hydrocarbon gas analyzer may
be used for the detection of leaks, by meeting the requirements of §§115.352
- 115.357 of this title (relating to Fugitive Emission Control in
Petroleum Refining, Natural Gas/Gasoline Processing, and Petrochemical
Processes in Ozone Nonattainment Areas). Every reasonable effort shall
be made to repair or replace a leaking component within 15 days after
a leak is found. If the repair or replacement of a leaking component
would require a unit shutdown, the repair may be delayed until the
next scheduled shutdown.
(3) Marine terminals. For marine terminals in the Houston-Galveston-Brazoria
area, the following inspection requirements apply.
(A) Before loading a marine vessel with a VOC which
has a vapor pressure equal to or greater than 0.5 pounds per square
inch absolute under actual storage conditions, the owner or operator
of the marine terminal shall verify that the marine vessel has passed
an annual vapor tightness test as specified in §115.215(7) of
this title (relating to Approved Test Methods). If no documentation
of the annual vapor tightness test is available, one of the following
methods may be substituted.
(i) VOC shall be loaded into the marine vessel with
the vessel product tank at negative gauge pressure.
(ii) Leak testing shall be performed during loading
using Test Method 21. The testing shall be conducted during the final
20% of loading of each product tank of the marine vessel and shall
be applied to any potential sources of vapor leaks on the vessel.
(iii) Documentation of leak testing conducted during
the preceding 12 months as described in clause (ii) of this subparagraph
shall be provided.
(B) During each VOC transfer, the owner or operator
of the marine terminal or of the marine vessel shall inspect for:
(i) visible liquid leaks;
(ii) visible fumes; and
(iii) significant odors.
(C) If a liquid leak is detected during VOC transfer
and cannot be repaired immediately (for example, by tightening a bolt
or packing gland), then the transfer operation shall cease until the
leak is repaired.
(D) If a vapor leak is detected by sight, sound, smell,
or hydrocarbon gas analyzer during the VOC loading operation, then
a "first attempt" shall be made to repair the leak. VOC loading operations
need not be ceased if the first attempt to repair the leak, as defined
in §101.1 of this title (relating to Definitions), to less than
10,000 parts per million by volume (ppmv) or 20% of the lower explosive
limit, is not successful provided that the first attempt effort is
documented by the owner or operator of the marine vessel as soon as
practicable and a copy of the repair log made available to a representative
of the marine terminal. No additional loadings shall be made into
the cargo tank until a successful repair has been completed and an
inspection conducted under 40 Code of Federal Regulations 61.304(f)
or 63.565(c).
(E) The intentional bypassing of a vapor control device
during marine loading operations is prohibited.
(F) All shore-based equipment is subject to the fugitive
emissions monitoring requirements of §§115.352 - 115.357
of this title. For the purposes of this paragraph, shore-based equipment
includes, but is not limited to, all equipment such as loading arms,
pumps, meters, shutoff valves, relief valves, and other piping and
valves between the marine loading facility and the vapor control system
and between the marine loading facility and the associated land-based
storage tanks, excluding working emissions from the storage tanks.
(G) Subparagraphs (B) and (D) of this paragraph do
not apply to fumes from hatches or vents if the fumes result from:
(i) a VOC transfer which is exempt from §115.212(a)(6)(A)
of this title under §115.217(a)(5) of this title; or
(ii) a VOC loading operation which, under the 90% control
option in §115.213(d) of this title, is not required to control
vapors caused by loading VOC.
(b) The owner or operator of each VOC transfer operation
in the covered attainment counties as defined in §115.10 of this
title (relating to Definitions) shall comply with the following inspection
requirements.
(1) Land-based VOC transfer to or from transport vessels.
The requirements of this paragraph apply at VOC transfer operations
in Aransas, Bexar, Calhoun, Gregg, Matagorda, Nueces, San Patricio,
Travis, and Victoria Counties, and at gasoline terminals and gasoline
bulk plants in the covered attainment counties. These requirements
no longer apply in Bexar County beginning January 1, 2025.
(A) During each VOC transfer, the owner or operator
of the transfer operation or of the transport vessel shall inspect
for:
(i) visible liquid leaks;
(ii) visible fumes; and
(iii) significant odors.
(B) VOC loading or unloading through the affected transfer
lines shall be discontinued immediately when a leak is observed and
shall not be resumed until the observed leak is repaired.
(C) All tank-truck tanks being filled with or emptied
of gasoline shall have been leak tested within one year in accordance
with the requirements of §§115.234 - 115.237 of this title
as evidenced by prominently displayed certification affixed near the
United States Department of Transportation certification plate.
(D) Subparagraphs (A) and (B) of this paragraph do
not apply to fumes from hatches or vents if the fumes result from:
(i) a VOC transfer which is exempt from §115.211
or §115.212(b)(1) of this title under §115.217(b) of this
title; or
(ii) a VOC loading operation which, under the 90% control
option in §115.213(c) of this title, is not required to control
vapors caused by loading VOC.
(2) Gasoline terminals-additional inspection. The owner
or operator of each gasoline terminal shall perform a monthly leak
inspection of all equipment in gasoline service. Each piece of equipment
shall be inspected during the loading of gasoline tank-trucks. For
this inspection, detection methods incorporating sight, sound, and
smell are acceptable. Alternatively, a hydrocarbon gas analyzer may
be used for the detection of leaks, by meeting the requirements of §§115.352
- 115.357 of this title. Every reasonable effort shall be made to
repair or replace a leaking component within 15 days after a leak
is found. If the repair or replacement of a leaking component would
require a unit shutdown, the repair may be delayed until the next
scheduled shutdown.
|
| Source Note: The provisions of this §115.214 adopted to be effective February 19, 1990, 15 TexReg 549; amended to be effective August 1, 1992, 17 TexReg 4683; amended to be effective December 3, 1993, 18 TexReg 8538; amended to be effective May 27, 1994, 19 TexReg 3703; amended to be effective June 16, 1995, 20 TexReg 4048; amended to be effective August 16, 1996, 21 TexReg 7557; amended to be effective May 22, 1997, 22 TexReg 4213; amended to be effective July 21, 1999, 24 TexReg 5488; amended to be effective May 16, 2002, 27 TexReg 4113;amended to be effective May 16, 2024, 49 TexReg 3292 |
