<<Prev Rule

Texas Administrative Code

Next Rule>>
TITLE 30ENVIRONMENTAL QUALITY
PART 1TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
CHAPTER 115CONTROL OF AIR POLLUTION FROM VOLATILE ORGANIC COMPOUNDS
SUBCHAPTER FMISCELLANEOUS INDUSTRIAL SOURCES
DIVISION 1CUTBACK ASPHALT
RULE §115.510Cutback Asphalt Definitions

The following terms, when used in this division (relating to Cutback Asphalt), shall have the following meanings, unless the context clearly indicates otherwise. Additional definitions for terms used in this division are found in §115.10 of this title (relating to Definitions), §101.1 of this title (relating to Definitions), and §3.2 of this title (relating to Definitions).

  (1) Asphalt emulsion--An emulsion consisting of a continuous and discontinuous phase, composed principally of a semisolid or liquid asphaltic base, water, and an emulsifying agent.

  (2) Conventional cutback asphalt-Any cutback asphalt which does not meet the definition of an exempt cutback asphalt.

  (3) Cutback asphalt--Any asphaltic cement which has been liquified by blending with petroleum solvents (diluents).

  (4) Exempt cutback asphalt--Any cutback asphalt which, when tested in accordance with American Society of Testing Materials Test Method D 402, "Distillation of Cutback Asphalt Products," as published in the 1997 edition of the Annual Book of ASTM Standards , shows the distillate fraction recovered up to 260 degrees Celsius (500 degrees Fahrenheit) to be less than 5.0% by volume of the total distillate recovered up to a temperature of 316 degrees Celsius (680 degrees Fahrenheit).


Source Note: The provisions of this §115.510 adopted to be effective August 18, 1999, 24 TexReg 6301

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page