<<Prev Rule

Texas Administrative Code

Next Rule>>
TITLE 43TRANSPORTATION
PART 1TEXAS DEPARTMENT OF TRANSPORTATION
CHAPTER 28OVERSIZE AND OVERWEIGHT VEHICLES AND LOADS
SUBCHAPTER HHIDALGO COUNTY REGIONAL MOBILITY AUTHORITY PERMITS
RULE §28.104Permit Issuance Requirements and Procedures

(a) Permit application. Application for a permit issued under this subchapter must be in a form approved by the department and at a minimum must include:

  (1) the name of the applicant;

  (2) a description of the kind of cargo to be transported;

  (3) the kind and weight of each commodity to be transported;

  (4) the maximum weight and dimensions of the proposed vehicle combination, including number of tires on each axle, tire size for each axle, distance between each axle measured from center of axle to center of axle, and the specific weight of each individual axle when loaded;

  (5) the locations where the cargo will be loaded and delivered; and

  (6) the date or dates on which movement is requested.

(b) Permit form and contents. A permit issued under this subchapter must be in a form approved by the department and at a minimum must include all information required under Transportation Code, §623.365(a) and §623.366.


Source Note: The provisions of this §28.104 adopted to be effective January 9, 2014, 39 TexReg 116; amended to be effective December 9, 2015, 40 TexReg 8800

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page