| (a) General information. Permits issued under this
section are subject to the requirements of §219.61 of this title
(relating to General Requirements for Permits for Oversize and Overweight
Unladen Lift Equipment Motor Vehicles).
(1) An unladen lift equipment motor vehicle permitted
under this section must not exceed:
(A) the weight limits established in §219.11(d)(1),
(2), and (3) of this title (relating to General Oversize/Overweight
Permit Requirements and Procedures);
(B) a gross weight of 120,000 pounds;
(C) legal length and height limits as specified in
Transportation Code, Chapter 621, Subchapter C; and
(D) 10 feet in width.
(2) A permit issued under this section may not be amended.
(3) An unladen lift equipment motor vehicle permitted
under this section must not cross a load-restricted bridge or a load-restricted
road when exceeding the posted capacity of such.
(b) Permit application and issuance.
(1) Initial permit application. An application for
an annual permit under this section must be made in accordance with §219.61(b)
of this title.
(2) Permit issuance. Upon receipt of the application
and the appropriate permit fee, the department will verify the application
information and provide the permit to the applicant.
|
| Source Note: The provisions of this §219.64 adopted to be effective February 21, 1999, 24 TexReg 1221; amended to be effective November 21, 1999, 24 TexReg 10144; amended to be effective June 1, 2008, 33 TexReg 3776; transferred effective January 1, 2012, as published in the Texas Register January 27, 2012, 37 TexReg 359; amended to be effective June 28, 2015, 40 TexReg 4003; amended to be effective March 6, 2018, 43 TexReg 1283; amended to be effective September 18, 2018, 43 TexReg 6003; amended to be effective July 18, 2024, 49 TexReg 5161 |
