<<Prev Rule

Texas Administrative Code

Next Rule>>
TITLE 30ENVIRONMENTAL QUALITY
PART 1TEXAS COMMISSION ON ENVIRONMENTAL QUALITY
CHAPTER 335INDUSTRIAL SOLID WASTE AND MUNICIPAL HAZARDOUS WASTE
SUBCHAPTER AINDUSTRIAL SOLID WASTE AND MUNICIPAL HAZARDOUS WASTE IN GENERAL
RULE §335.1Definitions

  (170) Used oil--Any oil that has been refined from crude oil, or any synthetic oil, that has been used, and, as a result of such use, is contaminated by physical or chemical impurities. Used oil fuel includes any fuel produced from used oil by processing, blending, or other treatment. Rules applicable to nonhazardous used oil, oil characteristically hazardous from use versus mixing, conditionally exempt small quantity generator hazardous used oil, and household used oil after collection that will be recycled are found in Chapter 324 of this title (relating to Used Oil Standards) and 40 Code of Federal Regulations Part 279 (Standards for Management of Used Oil).

  (171) Wastewater treatment unit--A device which:

    (A) is part of a wastewater treatment facility subject to regulation under either the Federal Water Pollution Control Act (Clean Water Act), 33 United States Code, §§466 et seq., §402 or §307(b), as amended;

    (B) receives and processes or stores an influent wastewater which is a hazardous or industrial solid waste, or generates and accumulates a wastewater treatment sludge which is a hazardous or industrial solid waste, or processes or stores a wastewater treatment sludge which is a hazardous or industrial solid waste; and

    (C) meets the definition of tank or tank system as defined in this section.

  (172) Water (bulk shipment)--The bulk transportation of municipal hazardous waste or Class 1 industrial solid waste which is loaded or carried on board a vessel without containers or labels.

  (173) Well--Any shaft or pit dug or bored into the earth, generally of a cylindrical form, and often walled with bricks or tubing to prevent the earth from caving in.

  (174) Wipe--A woven or non-woven shop towel, rag, pad, or swab made of wood pulp, fabric, cotton, polyester blends, or other material.

  (175) Zone of engineering control--An area under the control of the owner/operator that, upon detection of a solid waste or hazardous waste release, can be readily cleaned up prior to the release of solid waste or hazardous waste or hazardous constituents to groundwater or surface water.


Source Note: The provisions of this §335.1 adopted to be effective May 28, 1986, 11 TexReg 2335; amended to be effective September 1, 1986, 11 TexReg 3692; amended to be effective January 6, 1987, 11 TexReg 5096; amended to be effective July 14, 1987, 12 TexReg 2106; amended to be effective July 27, 1988, 13 TexReg 3515; amended to be effective February 1, 1989, 14 TexReg 316; amended to be effective August 4, 1989, 14 TexReg 3532; amended to be effective November 7, 1991, 16 TexReg 6065; amended to be effective July 29, 1992, 17 TexReg 5017; amended to be effective November 27, 1992, 17 TexReg8010; amended to be effective June 28, 1993, 18 TexReg 3814; amended to be effective November 23, 1993, 18 TexReg 8218; amended to be effective February 22, 1994, 19 TexReg 969; amended to be effective May 30, 1995, 20 TexReg 3722; amended to be effective February 26, 1996, 21 TexReg 1142; amended to be effective March 1, 1996, 21 TexReg 1425; amended to be effective March 6, 1996, 21 TexReg 2400; amended to be effective November 20, 1996, 21 TexReg 10983; amended to be effective July 16, 1997, 22 TexReg 6456; amended to be effective September 23, 1997, 22 TexReg 9252; amended to be effective October 19, 1998, 23 TexReg 10878; amended to be effective April 4, 1999, 24 TexReg 2352; amended to be effective September 5, 1999, 24 TexReg 6790; amended to be effective December 5, 1999, 24 TexReg 10562; amended to be effective April 30, 2000, 25 TexReg 3547; amended to be effective April12,2001, 26 TexReg 2741; amended to be effective May 30, 2001, 26 TexReg 3807; amended to be effective November 15, 2001, 26 TexReg 9135; amended to be effective January 30, 2003, 28 TexReg 715; amended to be effective September 1, 2003, 28 TexReg 6915; amended to be effective August 31, 2006, 31 TexReg 6755; amended to be effective August 16, 2007, 32 TexReg 5010; amended to be effective October 29, 2009, 34 TexReg 7321; amended to be effective February 21, 2013, 38 TexReg 978; amended to be effective January 8, 2015, 40 TexReg 77

Previous Page

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page