| (6) If a person's license or manufacturer registration
has been expired for 90 calendar days or fewer, the person shall submit
a renewal fee that is equal to 1 1/2 times the renewal fee in §14.2013
of this title (relating to License Categories, Container Manufacturer
Registration, Fees, and Application for Licenses, Manufacturer Registrations
and Renewals).
(7) If a person's license or manufacturer registration
has been expired for more than 90 calendar days but less than one
year, the person shall submit a renewal fee that is equal to two times
the renewal fee.
(8) If a person's license or manufacturer registration
has been expired for one year or more, that person shall not renew,
but shall comply with the requirements for issuance of an original
license or manufacturer registration under this section and §14.2013
of this title.
(9) After verification that the licensee or registered
manufacturer has met all requirements for licensing or manufacturer
registration, AFS shall renew the license or registration and send
the applicable authorization to the licensee or manufacturer.
(l) Applicants for license or license renewal in the
following categories shall comply with these additional requirements:
(1) An applicant for a Category 20 or 50 license or
renewal shall file with AFS a completed LNG Form 2505, certifying
that the applicant will follow the testing procedures indicated. LNG
Form 2505 shall be signed by the appropriate LNG company representative
designated on the licensee's LNG Form 2001.
(2) An applicant for Category 15, 20, or 50 license
or renewal who tests tanks, subframes LNG cargo tanks, or performs
other activities requiring DOT registration shall file with AFS a
copy of any applicable current DOT registrations. Such registration
shall comply with Title 40, Code of Federal Regulations, Part 107
(Hazardous Materials Program Procedures), Subpart F (Registration
of Cargo Tank and Cargo Tank Motor Vehicle Manufacturers and Repairers
and Cargo Tank Motor Vehicle Assemblers).
(3) An applicant for Category 15 or 50 license or renewal
who repairs or tests ASME containers shall file with AFS a copy of
its current ASME Code, Section VIII certificate of authorization or
"R" certificate. If ASME is unable to issue a renewed certificate
of authorization prior to the expiration date, the manufacturer may
request in writing an extension of time not to exceed 60 calendar
days past the expiration date. The request for extension shall be
received by AFS prior to the expiration date of the ASME certificate
of authorization referred to in this section, and shall include a
letter or statement from ASME that the agency is unable to issue the
renewal certificate of authorization prior to expiration and that
a temporary extension will be granted for its purposes. A registered
manufacturer shall not continue to operate after the expiration date
of an ASME certificate of authorization until the manufacturer files
a current ASME certificate of authorization with AFS or AFS grants
a temporary exception.
(m) Repair to a US DOT cylinder or cargo tank is defined
in 49 CFR §§180.203, 180.403 and 180.413. Changes made to
or maintenance of a cylinder or cargo tank excluded from the definition
of repair in 49 CFR §§180.203, 180.403 and 180.413 do not
require a license.
|
