<<Prev Rule

Texas Administrative Code

Next Rule>>
RULE §295.47Licensure: Individual Asbestos Consultant

(a) Licensing requirements. An individual must be licensed as an asbestos consultant to design asbestos abatement projects. A company employing an individual asbestos consultant may not hire an inspector, project manager, air monitoring technician, or another individual asbestos consultant without obtaining an asbestos consultant agency license.

  (1) Asbestos abatement project design includes the survey of public buildings for asbestos-containing building material (ACBM); the evaluation and selection of appropriate asbestos abatement methods; project layout; the preparation of plans, specifications and contract documents; and the review of environmental controls, abatement procedures and personal protection equipment to be employed at any time during the asbestos abatement activity, from the start through the completion dates of the project. A consultant may be hired by a building owner or the owner's agent to perform asbestos project management. If performing asbestos project management, the consultant is responsible to ensure proper procedures are used from the time of arrival of the abatement contractor on site through the completion of the removal of the containment and the departure of the contractor from the project site. Alternative control methods as referred to in 29 CFR §1926.1101(g)(6), such as dry removal or no negative air, shall be reviewed and certified in writing as at least as protective of the public health as the standard method described in §296.60 by a Certified Industrial Hygienist (CIH) or a Professional Engineer (PE) licensed in Texas and shall be approved in writing by the Chief of the Asbestos Programs Branch, Toxic Substances Control Division, prior to the start of abatement. The department will respond within 30 days of the department receiving the alternative control method with approval, notification of deficiencies, or denial.

  (2) If an asbestos abatement project includes alterations to a building's structure, its electrical, mechanical, safety systems, or their components, a licensed individual consultant in conjunction with or who is a licensed Professional Engineer (PE) in Texas must prepare the appropriate plans and specifications as required by the Texas Engineering Practice Act, Article 3271a and the rules of the Texas State Board for Registration for Professional Engineers in addition to the requirement of paragraph (1) of this subsection.

(b) Scope: Individual licenses. In addition to the design of asbestos abatement projects, individual asbestos consultants are licensed to provide:

  (1) asbestos surveys and assessment of the condition of ACBM;

  (2) asbestos management planning, including response actions, instructions, and periodic surveillance recommendations for the control of asbestos and the conduct of operations and maintenance (O&M) programs;

  (3) the collection of bulk material samples, airborne substance samples, and the planning of sampling strategies;

  (4) owner-representative services for asbestos abatement projects or O&M programs, including air monitoring and project management;

  (5) consultation regarding compliance with various regulations and standards, recommending abatement options, and preparations for asbestos abatement projects, specifically including technical specifications and contract documents; and

  (6) the selection, fit testing, and appropriate use of personal protection equipment, and the development of engineering controls for asbestos-related activities.

(c) Fees. The fee for a two-year license term is $645.

(d) Applications and renewals. Applications shall be submitted as required by §295.38 of this title (relating to Licensing and Registration: Applications and Renewals). Out-of-state applicants must comply with §295.39 of this title (relating to Licensing and Registration: Out-of-State Applicants).

(e) Eligibility for licensing. Verifiable evidence of current eligibility must be submitted with all applications for licensing as an individual asbestos consultant, which includes any one of the following:

  (1) current registration in the State of Texas as an architect or professional engineer; or

  (2) current highest full-qualification memberships in a national professional organization devoted to technical proficiency in environmental or occupational health protection, which includes:

    (A) a published code of ethics;

    (B) administration by an active board of directors; and

    (C) admission requirements that specify college courses and other training, a bachelor's or higher degree, at least three years' experience in specified fields, and a qualification examination (examples include the American Academy of Industrial Hygiene and the Board of Certified Safety Professionals); or

  (3) possession of a bachelor's degree in architecture, engineering, physical or natural science from an accredited four-year college or university, and including four years' experience in areas affecting environmental or occupational health matters.

(f) Qualifications. To qualify as an individual asbestos consultant, individuals shall provide:

  (1) verifiable documentation of their asbestos-related activity in conjunction with at least six asbestos abatement projects covering a period of at least a year within the past seven years. All asbestos work must be documented as having been performed under the applicable licensed or accredited rules or regulations;

  (2) a physician's statement of the required physical examination done within the past year as described in §295.42(e)(2) of this title (relating to Registration: Asbestos Abatement Workers) and submitted on the Texas Department of Health (department) "Physician's Written Statement" form only;

  (3) proof of having successfully completed the following training courses or the necessary annual refresher training within the past 12 months at an approved training facility:

    (A) the approved training course for abatement project designers, or the current annual refresher, according to §295.64(b) of this title (relating to Training: Required Asbestos Training Courses);

    (B) a modified three-day training course in sampling techniques and use of monitoring equipment, as required for air monitoring technician, or the current annual refresher training according to §295.64(g) of this title (relating to Training: Required Asbestos Training Courses). The initial course is not required of certified industrial hygienists; however, the refresher is required for license renewal or any subsequent reapplication for this license; and

    (C) training in asbestos surveys, as required for both licensed asbestos building inspectors and management planners, or the current annual refresher, according to §295.64(e) and (f) of this title (relating to Training: Required Asbestos Training Courses).

  (4) a copy of the wallet-size photo-identification card from the training course as required from all trainers in Texas in accordance with §295.65(f)(2) of this title (relating to Training: Approval of Training Courses). Persons submitting out-of-state training certificates with their applications may obtain the necessary photo-identification when attending the mandatory course on Texas Asbestos rules, as required in accordance with §295.64(h) of this title (relating to Training: Required Asbestos Training Courses);

  (5) a current one-inch by one-inch photograph of the face. The photograph submitted to the department for licensing purposes must have a white background; and

  (6) proof of successfully passing the department examination for consultant/project designer, if required.

(g) Insurance. A licensed individual asbestos consultant performing work for hire must obtain professional liability coverage in the amount of $1 million for errors and omissions, or be covered under the consultant's employer's policy, as specified in §295.40 of this title (relating to Licensing and Registration: Insurance Requirements).

(h) Responsibilities. The responsibilities of licensed asbestos consultants shall include the following:

  (1) preserve public health and diminish or eliminate hazards or potential hazards caused by the presence of ACBM in public buildings;

  (2) provide professional services to the building owner or management concerning asbestos building surveys, assessment of conditions of materials, planned operations and maintenance, compliance with work practices and standards;

  (3) evaluate possible asbestos abatement projects and prepare plans, specifications, schedules, and contract options for abatement projects;

  (4) represent the interests of the building owner during the conduct of an asbestos abatement project, including consultation with the abatement contractor personnel, requiring compliance with regulations and specifications, requiring remedy of infractions, providing monitoring services, maintaining progress records and photographs as necessary, waste disposal, designating in writing a project manager and specifying the manager's responsibilities and authority, and providing written assurance to the building owner or operator of the final clearance of the project; and

  (5) advise on the selection and use of appropriate personal protective equipment for all asbestos-related activities.

(i) Signature authority. All asbestos abatement plans and specifications must be signed on every page that addresses the scope of work and all drawings related to the abatement work. The cover page shall also include the consultant's signature, license number and license expiration date. The plans and specifications bearing the consultant's original signature shall be provided to the building owner prior to the start of the asbestos abatement. Plans and specifications that are used by another consultant, or consultant agency, to monitor a project, shall be reviewed, deletions and/or additions made, and signed in the same manner, indicating acknowledgment of their adequacy and the assumption for the responsibility related to the content contained therein.

Source Note: The provisions of this §295.47 adopted to be effective October 20, 1992, 17 TexReg 6901; amended to be effective September 22, 1994, 19 TexReg 7098; amended to be effective December 13, 1998, 23 TexReg 12353; amended to be effective March 27, 2003, 28 TexReg 2549; amended to be effective January 1, 2005, 29 TexReg 11987; amended to be effective February 1, 2006, 31 TexReg 400

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page