<<Prev Rule

Texas Administrative Code

Next Rule>>
TITLE 16ECONOMIC REGULATION
PART 4TEXAS DEPARTMENT OF LICENSING AND REGULATION
CHAPTER 76WATER WELL DRILLERS AND WATER WELL PUMP INSTALLERS
RULE §76.74Responsibilities of the Licensee--Marking Vehicles and Equipment

Licensees shall mark their well rigs and pump installer vehicles used by them or their employees in the well drilling or pump installer business with legible and plainly visible identification numbers.

  (1) The identification number to be used on rigs and vehicles shall be the licensee's license number.

  (2) License numbers shall be printed, upon each side of every well rig or pump installer vehicle, not less than two (2) inches high and in a color sufficiently different from the color of the vehicle or equipment so that the license number shall be plainly visible.

  (3) A licensee shall have thirty (30) days from the date a license is issued to properly mark all well rigs or pump installer vehicles used by him or his employees as provided in paragraphs (1) and (2).


Source Note: The provisions of this §76.74 adopted to be effective March 1, 2013, 38 TexReg 1142; amended to be effective September 15, 2014, 39 TexReg 7090

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page