<<Prev Rule

Texas Administrative Code

Next Rule>>
TITLE 25HEALTH SERVICES
PART 1DEPARTMENT OF STATE HEALTH SERVICES
CHAPTER 229FOOD AND DRUG
SUBCHAPTER NCURRENT GOOD MANUFACTURING PRACTICE AND GOOD WAREHOUSING PRACTICE IN MANUFACTURING, PACKING, OR HOLDING HUMAN FOOD
RULE §229.222Production and Process Controls

(a) General.

  (1) All operations in the manufacturing, processing, packing, and holding of food (including operations directed to receiving, inspections, transporting, and segregating) must be conducted in accordance with adequate sanitation principles.

  (2) Quality control operations must be employed to ensure that food is suitable for human consumption and that food-packaging materials are safe and suitable.

  (3) Overall sanitation of the plant must be under the supervision of one or more competent individuals assigned responsibility for this function.

  (4) Adequate precautions must be taken to ensure that production procedures do not contribute to allergen cross-contact and to contamination from any source.

  (5) Chemical, microbial, or extraneous-material testing procedures must be used where necessary to identify sanitation failures or possible allergen cross-contact and food contamination.

  (6) All food that has become contaminated to the extent that it is adulterated must be rejected, treated or processed to eliminate the contamination.

(b) Raw materials and other ingredients.

  (1) Food, including raw ingredients and finished product, must be obtained from an approved source.

  (2) Raw materials and other ingredients must be inspected and segregated or otherwise handled as necessary to ascertain that they are clean and suitable for processing into food and must be stored under conditions that will protect against allergen cross-contact and against contamination and minimize deterioration. Raw materials must be washed or cleaned as necessary to remove soil or other contamination. Water used for washing, rinsing, or conveying food must be safe and of adequate sanitary quality. Water may be reused for washing, rinsing, or conveying food if it does not cause allergen cross-contact or increase the level of contamination of the food.

  (3) Raw materials and other ingredients must either: not contain levels of microorganisms that may render the food injurious to the health of humans; or they must be pasteurized or otherwise treated during manufacturing operations so that they no longer contain levels that would cause the product to be adulterated.

  (4) Raw materials and other ingredients susceptible to contamination with aflatoxin or other natural toxins must comply with current Food and Drug Administration regulations for poisonous or deleterious substances before these materials or ingredients are incorporated into finished food.

  (5) Raw materials, other ingredients, and rework susceptible to contamination with pests, undesirable microorganisms, or extraneous material must comply with applicable Food and Drug Administration regulations for natural or unavoidable defects if a manufacturer wishes to use the materials in manufacturing food.

  (6) Raw materials, other ingredients, and rework must be held in bulk, or in containers designed and constructed so as to protect against allergen cross-contact and against contamination and must be held at a temperature and relative humidity and in such a manner as to prevent the food from becoming adulterated. Material scheduled for rework must be identified as such.

  (7) Frozen raw materials and other frozen ingredients must be kept frozen. If thawing is required prior to use, it must be done in a manner that prevents the raw materials and other ingredients from becoming adulterated.

  (8) Liquid or dry raw materials and other ingredients received and stored in bulk form must be held in a manner that protects allergen cross-contact and against contamination.

  (9) Raw materials and other ingredients that are food allergens, and rework that contains food allergens, must be identified and held in a manner that prevents allergen cross-contact.

(c) Manufacturing operations.

  (1) Equipment and utensils and finished food containers must be maintained in an adequate condition through appropriate cleaning and sanitizing, as necessary. In so far as necessary, equipment must be taken apart for thorough cleaning.

  (2) All food manufacturing, processing, packaging, packing and holding must be conducted under such conditions and controls as are necessary to minimize the potential for the growth of microorganisms, allergen cross-contact, contamination of food, and deterioration of food.

  (3) Food that can support the rapid growth of undesirable microorganisms must be held at temperatures that will prevent the food from becoming adulterated during manufacturing, processing, packing, and holding.

    (A) Time/temperature controlled for safety foods must be maintained at an internal temperature of 41 degrees Fahrenheit or below.

    (B) Frozen foods must be kept frozen at all times.

    (C) Shell eggs, after initial packing, must be transported and stored at the lower of 45 degrees Fahrenheit or as required by The United States Department of Agriculture.

    (D) The temperature of molluscan shellfish from the harvester through the original shellfish dealer must be maintained in accordance with 25 TAC §§241.57- 241.60 of this title (relating to Molluscan Shellfish). Raw molluscan shellfish must be adequately iced or refrigerated at 45 degrees Fahrenheit or less during all subsequent distribution, storage, processing, and sale.

    (E) Hot foods must be maintained at an internal temperature of 135 degrees Fahrenheit (60 degrees Celsius) or above.

    (F) Seafood intended for wholesale distribution must comply with temperature requirements specified in 21 Code of Federal Regulations Part 123.

    (G) Milk received directly from a facility under the jurisdiction of the Pasteurized Milk Ordinance must be received at an internal temperature of 45 degrees F or below. Further storage and transportation of the milk must be maintained at an internal 41 degrees or below.

  (4) Measures such as sterilizing, irradiating, pasteurizing, cooking, freezing, refrigerating, controlling pH or controlling aw that are taken to destroy or prevent the growth of undesirable microorganisms must be adequate under the conditions of manufacture, handling, and distribution to prevent food from being adulterated.

  (5) Work-in-process and rework must be handled in a manner that protects against allergen cross-contact, contamination, and the growth of undesirable microorganisms.

  (6) Effective measures must be taken to protect finished food from allergen cross-contact and from contamination by raw materials, other ingredients, or refuse. When raw materials, other ingredients, or refuse are unprotected, they must not be handled simultaneously in a receiving, loading, or shipping area if that handling could result in allergen cross-contact or contaminated food. Food transported by conveyor must be protected against contamination.

  (7) Equipment, containers, and utensils used to convey, hold, or store raw materials, work-in-process, rework, or other food must be constructed, handled, and maintained during manufacturing, processing, packing, and holding in a manner that protects against allergen cross-contact and against contamination.

  (8) Adequate measures must be taken to protect against the inclusion of metal or other extraneous material in food.

  (9) Food, raw materials, and other ingredients that are adulterated:

    (A) Must be disposed of in a manner that protects against the contamination of other food; or

    (B) If the adulterated food is capable of being reconditioned, it must be:

      (i) reconditioned using a method that has been proven to be effective; or

      (ii) reconditioned and reexamined and subsequently found not to be adulterated before being incorporated into other food.

  (10) Steps such as washing, peeling, trimming, cutting, sorting and inspecting, mashing, dewatering, cooling, shredding, extruding, drying, whipping, defatting, and forming must be performed so as to protect food against allergen cross-contact and against contamination. Food must be protected from contaminants that may drip, drain, or be drawn into the food.

  (11) Heat blanching, when required in the preparation of food capable of supporting microbial growth, must be affected by heating the food to the required temperature, holding it at this temperature for the required time, and then either rapidly cooling the food or passing it to subsequent manufacturing without delay. Growth and contamination by thermophilic microorganisms in blanchers must be minimized by the use of adequate operating temperatures and by periodic cleaning and sanitizing.

  (12) Batters, breading, sauces, gravies, dressings, dipping solutions, and other similar preparations that are held and used repeatedly over time must be treated or maintained in such a manner that they are protected against allergen cross-contact and against contamination, and minimizing the potential for the growth of undesirable microorganisms.

Cont'd...

Next Page

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page