<<Prev Rule

Texas Administrative Code

Next Rule>>
TITLE 16ECONOMIC REGULATION
PART 4TEXAS DEPARTMENT OF LICENSING AND REGULATION
CHAPTER 83BARBERS AND COSMETOLOGISTS
RULE §83.107Health and Safety Standards--Electric Drill Bits

(a) Only electric files, drills, or machines specifically designed and manufactured for use in the professional nail industry may be used in any establishment or school for performing manicure or pedicure services. Craft, hardware, and hobby tools cannot be used under any circumstances.

(b) After each use, diamond, carbide, natural and metal bits must be cleaned by either

  (1) using a brush;

  (2) using an ultrasonic cleaner; or

  (3) immersing the bit in acetone for 5 to 10 minutes.

(c) Immediately after cleaning all visible debris, diamond, carbide, natural and metal bits must be disinfected by complete immersion in an appropriate disinfectant between clients, then sterilized in accordance with this chapter.

(d) Buffing bits and chamois must be cleaned with soap and water at the end of every day of use in addition to being cleaned or replaced between clients.


Source Note: The provisions of this §83.107 adopted to be effective March 1, 2006, 31 TexReg 1280; amended to be effective August 1, 2006, 31 TexReg 5952; amended to be effective January 1, 2023, 47 TexReg 8640

Link to Texas Secretary of State Home Page | link to Texas Register home page | link to Texas Administrative Code home page | link to Open Meetings home page