| (a) In order to determine the safety of a container,
AFS may require that the licensee or operator of the container submit
a copy of the manufacturer's data report on that container. AFS may
also require that the container and equipment be examined by a Category
A, B, or O licensee, with a comprehensive report on the findings submitted
to AFS for its consideration. This subsection may be applied even
though an acceptable LPG Form 23 has been received.
(b) Any stationary ASME LP-gas container previously
in LP-gas service which has not been subject to continuous LP-gas
vapor pressure shall be retested by an authorized Category A, B, or
O licensed entity utilizing recognized ASME test methods to determine
if the container is safe for LP-gas use in Texas, and the test results
shall be submitted to AFS on LPG Form 8.
(c) Any stationary ASME LP-gas container which has
been subject to continuous LP-gas vapor pressure is not required to
be tested prior to installation, provided the licensee or operator
of the container files a completed LPG Form 23 with AFS at the time
LPG Form 500 is submitted for any facility requiring submission of
a site plan in accordance with §9.101 of this title (relating
to Filings Required for Stationary LP-Gas Installations).
(d) Any stationary ASME LP-gas container brought into
Texas from out-of-state and intended for stationary LP-gas installation
in Texas at any facility requiring submission of a site plan shall
be tested in accordance with subsection (b) of this section prior
to review approval being granted by AFS, unless that container is
owned by a valid licensee. In this case, AFS may determine that such
tests are not necessary upon the receipt of an acceptable LPG Form
23 from the licensee.
|
| Source Note: The provisions of this §9.115 adopted to be effective February 1, 2001, 26 TexReg 947; amended to be effective September 1, 2005, 30 TexReg 4810; amended to be effective December 24, 2012, 37 TexReg 9913; amended to be effective January 6, 2020, 45 TexReg 127 |
