| (a) For the purposes of this section, alternative onsite
water does not include reverse osmosis reject water, as this source
of water is regulated by Subchapter E of this chapter (relating to
Special Requirements for Use of Industrial Reclaimed Water).
(b) An authorization from the commission is not required
for the use of graywater and alternative onsite water from a graywater
reuse system or a combined reuse system at an industrial facility,
commercial facility, or institution. Treatment required by this section
does not require authorization from the commission.
(c) The graywater and alternative onsite water must
be generated and used onsite.
(d) Graywater reuse systems and combined reuse systems
are not authorized to overflow onto the ground under any circumstances.
(1) Graywater reuse systems must be designed and constructed
so that 100% of the graywater can be diverted to an organized wastewater
collection system, on-site sewage facility (OSSF), authorized outfall
in a wastewater discharge permit, or authorized disposal area in a
Texas Land Application Permit (TLAP). The graywater must be diverted
to the organized wastewater collection system, OSSF, authorized outfall
in a wastewater discharge permit, or authorized disposal area in a
TLAP during periods of non-use of the graywater reuse system or if
the system reaches maximum capacity. The graywater must enter the
organized wastewater system or OSSF through either one air gap or
two backflow valves or backflow preventers.
(2) Combined reuse systems must be designed and constructed
so that 100% of the graywater can be diverted to an organized wastewater
collection system, OSSF, authorized outfall in a wastewater discharge
permit, or authorized disposal area in a TLAP prior to entering the
combined reuse system. Graywater must be diverted to the organized
wastewater collection system, OSSF, authorized outfall in a wastewater
discharge permit, or authorized disposal area in a TLAP during periods
of non-use of the system or if the combined reuse system reaches 80%
capacity. The graywater must enter the organized wastewater collection
system or the OSSF through either one air gap or two backflow valves
or backflow preventers.
(3) Combined reuse systems that store stormwater, rainwater,
and/or foundation drain water must have an automatic shutoff system
to stop the inflow of stormwater, rainwater, and foundation drain
water into the combined reuse system. The automatic shutoff system
must activate when the combined reuse system reaches 80% capacity.
(e) Water from a graywater reuse system or a combined
reuse system may be used onsite for the following activities.
(1) Process water. Water from a graywater reuse system
or a combined reuse system that is used for process water must be
treated to a standard that allows the water to be used in operational
processes.
(2) Landscape maintenance. Water from a graywater reuse
system or a combined reuse system that is used for landscape maintenance
must meet the following limits.
(A) If the water will be applied in areas with public
access, the water must meet the following limits:
(i) Escherichia coli (E. coli), 20
most probable number (MPN) or colony-forming units (CFU) per 100 milliliters
(ml), 30-day geometric mean; or
(ii) E. coli (not to
exceed), 75 MPN or CFU per 100 ml, single grab sample.
(B) If the water will be applied in areas with restricted
access to the public, the water must meet the following limits:
(i) E. coli, 200 MPN
or CFU per 100 ml, 30-day geometric mean; or
(ii) E. coli (not to
exceed), 800 MPN or CFU per 100 ml, single grab sample.
(3) Dust control. Water from a graywater reuse system
or a combined reuse system that is used for dust control must meet
the E. coli limits in paragraph (2)(B)
of this subsection.
(4) Toilet or urinal flushing. Water from a graywater
reuse system or a combined reuse system that is used for toilet or
urinal flushing must meet the following requirements.
(A) E. coli must be
less than 2.2 MPN or CFU per 100 ml for 30-day geometric mean and
less than 200 MPN or CFU per 100 ml maximum single grab sample.
(B) Total suspended solids must be less than 10.0 milligrams
per liter for 30-day geometric mean and less than 30.0 milligrams
per liter maximum single grab sample.
(C) All exposed piping and piping carrying graywater
and/or alternative onsite water within a building must be either purple
pipe or painted purple; all buried piping installed after January
6, 2005, must be either manufactured in purple, painted purple, taped
with purple metallic tape, or bagged in purple; and all exposed piping
must be stenciled in yellow with a warning reading "NON-POTABLE WATER."
(5) Other uses. Water from a graywater reuse system
or a combined reuse system that is used for other similar activities
must:
(A) meet the E. coli limits
in paragraph (2)(A) of this subsection if used in a way that the public
may come into contact with the water; or
(B) meet the E. coli limits
in paragraph (2)(B) of this subsection if used in a way that the public
will not come into contact with the water.
(f) Water from a graywater reuse system or a combined
reuse system that is required to meet the E.
coli limits in subsection (e) of this section must be monitored
for E. coli at least monthly. These
records must be maintained at the site and be readily available for
inspection by the commission for a minimum of five years.
|
