| (a) Generators who use analytical data to classify
their waste pursuant to §335.509 of this title (relating to Waste
Analysis) must maintain documentation of their sampling procedures
in accordance with this section and 40 Code of Federal Regulations §262.11(f)
as adopted under §335.53 of this title (relating to General Standards
Applicable to Generators of Hazardous Waste).
(b) The sampling documentation must, at a minimum,
include the following:
(1) dates samples were collected;
(2) a description of the site or unit from which the
sample is taken and sampling location(s) at the site unit;
(3) sample methods and sample equipment utilized; and
(4) description of sample handling techniques, including
containerization, preservation, and chain of custody.
(c) Generators shall document all the information listed
in subsection (b) of this section, and shall retain copies on-site
in accordance with §335.513 of this title (relating to Documentation
Required).
(d) Generators who have existing sampling documentation,
which includes the information listed in subsection (b) of this section,
do not need to prepare any new documentation specifically for this
section.
|
| Source Note: The provisions of this §335.510 adopted to be effective November 27, 1992, 17 TexReg 8010; amended to be effective February 24, 1994, 19 TexReg 1042; amended to be effective May 30, 1995, 20 TexReg 3722; amended to be effective February 3, 2022, 47 TexReg 318 |
