(a) Only electric files, drills, or machines specifically
designed and manufactured for use in the professional nail industry
may be used in any establishment or school for performing manicure
or pedicure services. Craft, hardware, and hobby tools cannot be used
under any circumstances.
(b) After each use, diamond, carbide, natural and metal
bits must be cleaned by either
(1) using a brush;
(2) using an ultrasonic cleaner; or
(3) immersing the bit in acetone for 5 to 10 minutes.
(c) Immediately after cleaning all visible debris,
diamond, carbide, natural and metal bits must be disinfected by complete
immersion in an appropriate disinfectant between clients, then sterilized
in accordance with this chapter.
(d) Buffing bits and chamois must be cleaned with soap
and water at the end of every day of use in addition to being cleaned
or replaced between clients.
|
Source Note: The provisions of this §83.107 adopted to be effective March 1, 2006, 31 TexReg 1280; amended to be effective August 1, 2006, 31 TexReg 5952; amended to be effective January 1, 2023, 47 TexReg 8640 |